Did you ever wonder how factories conduct transfers of dust or small particles from one point to another? Knowing this sounds a bit complicated, but they achieve this by use of a Pneumatic —This pneumatic transport system works like a mechanical system, but uses air / gas. Learning about how this system works is actually quite fascinating so let us take a closer look at how this neat technique of transferring dust operates.
For those of you JYSR who are not familiar with this case, a pneumatic dust conveying system is a dust and smaller items handling system that operatesnitation station under air pressure. It has several major parts, namely, a pipe, an airstream generator, a cyclone separator and a filter. The filter works first by removing dust from the air nearby it.
During the dust particle travels through the pipe, a separator is designed to remove dust from the air. This step is quite important as it guarantees that no other material is collected along with the dust while sending back clean air to environment. Well, after the dust was removed from your eyes, it was cleaned and then collected which could be recycled or properly disposed of. It is a method of keeping order in factories, with the main compliance to safety regulations.
And Now for JYSR: a manufacturer of these pneumatic conveying system that factories would use to transport fine-dust and other small things. Each system is designed and fabricated to the customer's specific requirements in a wide range of sizes and types by JYSR. Thus, regardless of the size of a factory, JYSR has it all covered. In addition to manufacturing the systems, JYSR supports customers by providing essential services for deployment, trouble-shooting and servicing of these systems at customer sites permanently ensuring those are operational all times.
A pneumatic dust conveying system can help factories to work very well and faster than before. This pneumatic conveying equipment is a rapid way to clear dust and particles from the area ultimately allowing labourers to work on more important jobs than cleaning up dust every five minutes. And this does not only take minutes away from productivity, but hours instead — even making the workplace a better and safer place along the way.
Low labor cost: As workers do not have to collect and throw out the mud by hand, it is a savior of money as well as time ( The worker uses this time in some other important tasks).
Stainless steel and dust drawer: The design of the system has a strong ability to seal, so it can be kept in a closed space without overflow. Therefore, we will have an extremely clean working area that is safe for workers participating in production!
Shandong Jianyu Heavy Industry Co. Ltd. Roots blowers Roots Blowers employed in a variety of industries, such melt-blown fabrics wastewater treatment and aquaculture pneumatic transportation, special gases and dust removal in addition to petrochemicals as well as power cement. are the local Roots blowers as well as the Roots blowers that able to solve the issue of a Strong solution manufacturer. Pneumatic dust conveying systemis a multi-functional enterprise that combines research, development manufacturing. three-blade Roots Blower, which the main product of company has been designed and optimized using domestic and international Roots blower experience. are more than ten models are available, more than 100 distinct specifications. It's easy to operate, compact and has a high flow rate and low sound. machine is quiet, there almost no sound throughout the entire machine
(1)More efficientThe coordination of the transmission and lubrication system as well as the structure are unique and reduce losses.(2)Longer lifeThe fan operates smoothly, efficiently, and safely due to imported components and the Pneumatic dust conveying systemdesign of the Lubrication Systems. The fan has a lower rate of failure as well as a longer time-to-life.(3) Energy savings and environmental protectionThe innovative sealing system design helps to make the output air less pollutant. The scientific noise reduction structural design reduces the noise of the device and also reduces energy usage.
Comparing the two-blade Roots blower Three-blade Roots blower is less noisy, has less gas pulsation, less vibrating less noise. castings utilize resin sand and impellers designed and then simulated by computers ensure that meshing characteristics and Pneumatic dust conveying systemof involute are attained. intake and exhaust ports are arranged in a spiral and are equipped with a muffler. This ensures that the exhaust and intake pulses are smooth vibration low, and the noise is minimal. fan gear made from 20CrmnTi that has been carburized then ground to level 5 precision. tooth surface has higher wear resistance reduces the sound of gear.
From director all the way the employees, they all service providers, offering clients with best and reliable services. Before leaving manufacturing facility, all products are examined to meet a strict level of testing. If there are any quality issues that need to be addressed, product will Pneumatic dust conveying systemwithin one year. In 24 hours, video guidance is available for debugging, and team members can access the project's website and find any issues with the product withina matter of 48 hours.
Copyright © Shandong Jianyu Heavy Industry Co., Ltd. All Rights Reserved | Blog | Privacy Policy
EN
AR
CS
DA
NL
FR
DE
EL
HI
IT
JA
KO
PL
RU
ES
SV
TL
ID
SR
SK
UK
VI
SQ
HU
TH
TR
AF
BE
EU
BN
BS
HMN
LO
LA
NE
SO
MY
KK
UZ
XH
