You must have observed pipe connected to the machinery which carry it from one point to another in a factory right? The pipes you asked about are probably associated with something called a pneumatic conveying system, identical to JYSR's product industrial air blower manufacturers. Air Slide Conveying System: This one is a unique system that uses air pressure to transport powdered, granulated or other free-flowing materials. They are technology that makes factory work better organized and efficient.
These pneumatic conveying systems are somewhat equivalent to giant vacuum cleaners. They do not suck the dirt and dust from a floor; instead, they move various materials through lines within a building. The pipes are typically of durable material (like steel or plastic) and they can extend quite a distance. Some systems are so mighty, that they can move materials from one building to another as well.
Factories had to make do with other methods of transporting materials before pneumatic systems became widespread, similar to the 5 hp roots blower from JYSR. They could have conveyor belts, which are like escalators; or buckets that hang from cables to hoist things up. The older methods were sometimes even slower and less efficient than the modern pneumatic systems. Pneumatic systems facilitate efficient and speedy movement of substances even over long distances through pipes with the help of high-pressure air. This can produce more by mechans. of factories and in less time than doing it any other way
What are the nice things about pneumatic conveying systems and why are they so useful? They can carry materials of variety shapes and sizes, from small bits to large pieces, also the JYSR's product such as roots type pump. That level of flexibility allows them to work with a lot more materials without the headache. In addition, these systems can be tailored to a factory and are therefore highly adaptable. They are also closed systems which prevents airborne contamination of the materials. For manufacturers striving for top-quality, this is a huge deal.
So we dig a little bit deeper to see how pneumatic conveying systems operate, similar to the what is a roots blower manufactured by JYSR. The production process starts with the materials being placed in a hopper; this is a large container developed just to hold materials. Following that, a feeder assists in pipe injection of materials. When in the pipe, air forces materials along to go to where it needs to be. For one, the air pressure is adjustable and so can be increased or decreased in order to change how quickly materials are forced through the pipes. After a few moments, the materials slowly creep through and spill out of the bottom of the pipe onto their end site.
When it comes to the movement of materials, Pneumatic conveying systems have several advantages over traditional methods, as well as the JYSR's air blower for air compressor. They do the job quickly, as well to transport loads rapidly. This quickened manufacturing process of course saves time and money for the factory, which is always a positive. Also, closed systems might contribute to the maintainability and cleanliness of the materials. They are more maintainable than other methods as well. This in turn means that factories are even further savings in money and time, as the workings do not fail so often.
(1)More efficientunique design precise Pneumatic conveying systemof transmission and lubrication systems reduce various losses dramatically improve the efficiency of the machine.(2)Longer life key components are imported. Additionally, the unique design of lubrication system helps fan work effortlessly, safely and effectively with low failure rates a longer service life.Energy conservation environmental protectionThe unique sealing system design allows the output air to be cleaner. The innovative noise reduction design reduces the noise of the device and helps reduce energy consumption.
Shandong Jianyu Heavy Industry Co., Ltd. Blowers, Roots Pneumatic conveying systemused in various industries, including melt-blown fabric well as aquaculture and sewage treatment, pneumatic transport, special gases and dust removal along petrochemicals and power cement. Roots blowers are manufactured in the US and manufactured and provide problem of strong. company is a leader in technical production development capabilities. It is company that combines development, research, manufacturing and sales. company's leading product, three-blade Roots blower is optimized designed absorbing both domestic as well as foreign Roots blower experience in design. There over ten models, and more than 100 specifications. It is easy to operate, compact but has a significant flow rate, and is low-noise. Smooth, virtually no noise in whole machine
employees, from director to the worker, service providers who provide most professional service. Before leaving Pneumatic conveying system facility, all products are checked against strict set of testing. If there are any problems with the quality of the product, it will be replaced within year. Video tutorials for troubleshooting within 24 hours. can go the project site detect problems with the product in less than 48 hours and provide immediate solutions.
three-blade Roots Blower is quieter has less vibration compared to two-blade Roots Blower. castings are fabricated using resin sand, the impeller has been designed as per involute theory and simulated using a computer. maximizes the meshing features of the involute and Pneumatic conveying systemefficiency. ports for exit and intake spiral-shaped, and include an exhaust muffler, which reduces vibration and noise. fan gear has been made of 20CrmnTi which carburized and then ground to a level of 5 precision. tooth surface has higher wear resistance and reduces gear noise.
Copyright © Shandong Jianyu Heavy Industry Co., Ltd. All Rights Reserved | Blog | Privacy Policy
EN
AR
CS
DA
NL
FR
DE
EL
HI
IT
JA
KO
PL
RU
ES
SV
TL
ID
SR
SK
UK
VI
SQ
HU
TH
TR
AF
BE
EU
BN
BS
HMN
LO
LA
NE
SO
MY
KK
UZ
XH
